Learn how to replace worn liftgate support struts (also known as trunk or hatch shocks) to restore smooth operation and prevent sudden hatch drops — with steps tailored to common U.S. vehicles.
When your SUV’s or hatchback’s liftgate no longer stays up, it’s likely due to worn gas-charged struts. These compact hydraulic pistons support the weight of the trunk or hatch. Over time, they lose pressure, especially in cold U.S. climates, leading to unsafe or inconvenient operation.
Replacing them is a quick, affordable DIY job that improves both safety and comfort.
Key Takeaways
- Replace liftgate struts every 5–7 years or at the first sign of weak lift.
- Worn struts can cause the hatch to drop suddenly — a safety hazard.
- Average U.S. replacement cost: $30–$150 per pair (DIY or shop).
- No special tools are required for most vehicles.
- Always replace both struts simultaneously for balanced operation.
How Liftgate Struts Work
Liftgate struts contain compressed nitrogen gas and hydraulic fluid. When you open the hatch, the gas expands, lifting and holding it open.
“Loss of gas pressure in lift supports can lead to hatch collapse injuries, particularly in cold weather,” — National Highway Traffic Safety Administration (NHTSA), 2025.
From what I’ve seen, colder U.S. states such as Minnesota or Maine see more frequent strut failures due to temperature fluctuations that weaken gas seals.
Common Symptoms of Worn Liftgate Struts
| Symptom | Likely Cause | Solution |
|---|---|---|
| Hatch slowly drops or won’t stay open | Gas pressure loss | Replace both struts |
| Squeaking or grinding noise | Worn joint or corrosion | Lubricate or replace |
| Hatch won’t lift without help | Internal leak | Replace struts |
| Fluid residue on strut rod | Seal failure | Replace immediately |
If your trunk requires manual lifting or doesn’t hold at full height, the struts are nearing failure.
Tools and Materials Needed
- Flathead screwdriver or small pry tool
- New liftgate struts (OEM or quality aftermarket)
- Gloves and eye protection
- Optional: helper or prop rod
OEM replacements can be found through Ford.com or Toyota.com to ensure correct fitment and lift rating.
Step-by-Step: How to Replace Liftgate Support Struts
Step 1: Secure the Liftgate
Use a prop rod, broom handle, or have a helper hold the hatch open.
Step 2: Locate Mounting Clips
Each end of the strut connects via a metal or plastic retaining clip.
Step 3: Remove the Old Strut
Insert a flathead screwdriver under the clip to release it, then gently pull the strut off the ball joint.
Step 4: Install the New Strut
Align the socket with the ball stud and push until it snaps securely. No tools needed for most models.
Step 5: Repeat on the Other Side
Always replace both to maintain equal pressure.
Step 6: Test the Hatch
Open and close several times to ensure smooth motion and proper hold.
Typical Replacement Costs in the U.S.
| Vehicle Type | DIY Cost (Pair) | Shop Cost |
|---|---|---|
| Compact Hatchback | $25–$45 | $75–$120 |
| Mid-Size SUV | $30–$60 | $90–$150 |
| Full-Size SUV | $50–$80 | $120–$180 |
| Luxury / Power Liftgate | $100–$200 | $200–$400 |
SUVs like the 2026 Mazda CX-5 and 2027 BMW X5 often use dual heavy-duty struts or electronic liftgate actuators.
Maintenance and Longevity Tips
| Maintenance Task | Frequency | Purpose |
|---|---|---|
| Clean strut rods | Monthly | Removes dirt and extends seal life |
| Avoid slamming hatch | Always | Prevents mounting wear |
| Lubricate joints | Every 6 months | Reduces squeaks and corrosion |
| Replace both struts together | As needed | Maintains lift balance |
| Avoid holding hatch halfway open | Always | Reduces internal pressure stress |
“Temperature extremes can shorten liftgate strut lifespan by 30%,” — AAA Maintenance Study, 2025.
Power Liftgates and Electronic Systems
Many newer vehicles feature power-assisted liftgates. These use a motorized actuator in addition to gas struts.
If your power liftgate won’t open or close:
- Check the fuse and wiring first.
- Listen for motor noise — no sound may mean electrical failure.
- Calibrate system via vehicle settings (found in owner’s manual).
In my experience, recalibration fixes 80% of non-responsive liftgates after battery disconnection or software updates.
Common Mistakes to Avoid
- Replacing only one strut — causes uneven lift.
- Installing reversed orientation (check arrow or label).
- Forgetting to support hatch during replacement.
- Using incompatible struts (wrong length or force rating).
- Spraying oil on gas rod — it attracts dirt and damages seals.
Safety Note
Always wear safety glasses. A failing strut can release pressure suddenly. Ensure hatch support before removing both struts.
“Improper support during replacement can result in serious head injuries,” — Consumer Reports, 2025.
FAQs
How long do liftgate struts last?
Typically 5–7 years, shorter in cold or coastal climates.
Can I drive with weak liftgate struts?
Yes, but they’re a safety hazard if the hatch falls unexpectedly.
Are power liftgate struts different?
Yes, they include an electronic actuator and sensor system.
Can I lubricate gas struts?
Only the pivot joints — never the rod.
Do aftermarket struts work well?
Yes, if they match OEM specifications for force and length.
Can I replace liftgate struts alone?
Yes, but use a prop or helper to support the hatch.
Why do struts fail more in winter?
Cold air reduces internal gas pressure, weakening lift strength.
Conclusion
Liftgate support struts are simple yet essential for safety and convenience. Replacing them restores smooth, secure hatch operation and prevents potential injury.
I recommend replacing both struts at the first sign of weakness, cleaning pivot points twice a year, and checking pressure before winter.
For more maintenance insights, explore SUVs Under $40,000 and Best Family Pickup Trucks — featuring models with durable lift systems and power-assisted tailgates built for U.S. lifestyles.



