CarViraAutomotive magazine

Home / Article

What to Do If You Get a Flat Tire: Complete Emergency Guide

Learn critical steps for handling tire blowouts and flat tires safely. Master vehicle control techniques, safe pullover procedures, and proper tire changing methods to handle roadside emergencies confidently. Experiencing a…

Learn critical steps for handling tire blowouts and flat tires safely. Master vehicle control techniques, safe pullover procedures, and proper tire changing methods to handle roadside emergencies confidently.

Experiencing a tire blowout or flat tire while driving creates one of the most dangerous roadside emergencies motorists face, as the sudden loss of control can lead to serious accidents if not handled properly. A tire blowout occurs when a tire suddenly ruptures and deflates rapidly, often accompanied by a loud bang and immediate pulling of the vehicle toward the failed tire. Understanding the correct emergency response sequence—avoiding panic braking, maintaining steering control, and pulling over safely—can prevent the crashes and injuries that occur when drivers react incorrectly to tire failures, while knowing proper tire changing procedures gets you back on the road safely.

Key Takeaways:

  • Never slam on brakes during a blowout as this causes loss of control and potential spinouts
  • Grip the steering wheel firmly with both hands and steer straight to maintain vehicle direction
  • Gradually slow by easing off the accelerator, then brake gently once speed drops below 30 mph
  • Pull completely off the roadway to a safe, flat location away from traffic before attempting tire change
  • Loosen lug nuts before raising the vehicle with the jack for easier removal
  • Temporary spare tires have speed and distance limitations requiring prompt replacement

Immediate Response to Tire Blowout

Stay Calm and Grip the Wheel

The moment a tire blows out, you’ll hear a loud bang, feel the vehicle pull sharply toward the failed tire, and possibly experience vibration or thumping sounds. Your instinctive reaction will be to brake hard and overcorrect the steering—both responses that dramatically increase crash risk. Instead, immediately grip the steering wheel firmly with both hands in the 9-and-3 or 10-and-2 positions to maintain control.

The violent pull from a blown tire, especially a front tire, requires significant steering force to counteract. Maintain a firm grip and steer in the direction you want the vehicle to travel, keeping it as straight as possible. Don’t make sudden steering corrections or large steering wheel movements that could trigger a spin or swerve into other lanes.

Focus your vision far ahead on where you want to go rather than fixating on obstacles or the roadside. Your hands naturally steer toward whatever you’re looking at, so looking at the guardrail or ditch increases the chance you’ll hit it. Keep your eyes on the safe path ahead.

Never Slam the Brakes

Hard braking during a tire blowout is the most dangerous reaction possible. When one tire has no grip, sudden braking locks the remaining tires and causes complete loss of control. The vehicle can spin, roll over, or veer wildly across lanes. Resist the overwhelming urge to brake hard no matter how frightening the situation feels.

Instead of braking, keep your foot off the brake pedal entirely for the first few seconds while you regain steering control and assess the situation. Let the failed tire’s drag naturally slow the vehicle somewhat while you steer to maintain your lane position.

Accelerate Slightly if Needed

In some situations, particularly front tire blowouts at highway speeds, briefly pressing the accelerator slightly can help maintain control and stability. This counterintuitive technique adds power to the good tires, helping you maintain forward momentum and reducing the pulling effect from the blown tire.

Apply just enough throttle to stabilize the vehicle—you’re not trying to speed up, just counteracting the sudden drag. Once the vehicle feels stable and tracking straight, immediately ease off the accelerator to begin slowing.

Begin Gradual Deceleration

After gaining initial control and steering the vehicle straight, begin slowing by gradually lifting your foot off the accelerator. Let the vehicle coast and decelerate naturally from wind resistance and the drag of the failed tire. This gradual slowing maintains stability far better than braking.

As your speed drops below 40-50 mph, you can begin applying very gentle brake pressure to continue slowing. Increase brake pressure progressively as speed decreases—the slower you’re traveling, the more braking force you can safely apply. Keep brake application smooth and gradual rather than sudden.

By the time you reach 20-30 mph, you can brake more normally to bring the vehicle to a stop. At these lower speeds, the blown tire’s effect on stability is minimal and normal braking becomes safe.

Pulling Over Safely

Activate Hazard Lights

Turn on your hazard flashers as soon as you have steering control established and one hand available to reach the button. Hazard lights warn approaching drivers that you’re experiencing problems and may be slowing or stopping unexpectedly. This warning helps prevent rear-end collisions from drivers who don’t realize you’re disabled.

Keep hazards flashing throughout your time stopped on the roadside to maintain visibility to passing traffic.

Choose a Safe Location

Look for a wide, flat shoulder or safe area completely off the roadway to pull over. Ideal locations include rest areas, parking lots, wide shoulders with level ground, or side streets away from high-speed traffic. Avoid stopping in travel lanes, on narrow shoulders, on curves, on hills, on bridges, or in tunnels where your stopped vehicle creates hazards for passing traffic.

If you’re on a limited-access highway and a blowout occurs, try to reach the next exit if you can safely maintain minimal forward progress. Exit ramps and surface streets provide much safer locations than highway shoulders for changing tires.

If no good options exist nearby, pull as far right as possible onto whatever shoulder is available. Get the vehicle completely off the pavement—all four wheels should be on the shoulder, not just two. The extra few feet of distance from traffic lanes significantly improves your safety.

Position for Maximum Safety

Park the vehicle on the flattest, most level surface possible. Jacks become unstable on slopes, creating tip-over risks during tire changes. If some slope is unavoidable, position the vehicle so it won’t roll if the jack fails.

Engage the parking brake fully and put the transmission in Park (automatic) or first gear (manual). These actions help prevent the vehicle from rolling during the tire change.

Turn off the engine once stopped. You won’t need it running during the tire change, and turning it off eliminates any chance of accidental movement.

Assessing the Situation

Exit the Vehicle Safely

Before exiting, check mirrors and look over your shoulder for approaching traffic. Open the door only when no vehicles are passing. Exit from the passenger side if possible, putting the vehicle between you and traffic. If you must exit from the driver’s side on a highway shoulder, move quickly away from the traffic lane after exiting.

Never stand between your vehicle and passing traffic. Always position yourself on the side of the vehicle away from traffic flow. One step too close to the travel lane could be fatal if a passing vehicle sideswipes your car or drifts onto the shoulder.

Inspect the Tire Damage

Walk around to examine the failed tire and assess the damage. Look for obvious punctures, sidewall tears, or complete tread separation. Check whether the tire is completely flat or just low on air. Inspect the other three tires for damage—sometimes road hazards affect multiple tires.

If you see severe tire damage with steel belts protruding, large tears in the sidewall, or tread completely separated from the tire, you’ll need to replace it. Minor punctures might be repairable, but assessment and repair should wait until you’re at a tire shop.

Decide on Course of Action

Evaluate whether you can safely change the tire yourself or need to call for assistance. Consider these factors:

Call for roadside assistance if:

  • The vehicle is on a narrow shoulder with high-speed traffic passing very close
  • The ground is too soft, sloped, or unstable for safe jacking
  • Weather conditions make the work dangerous (heavy rain, darkness, extreme cold)
  • You lack the tools, spare tire, or physical ability to complete the change
  • You feel unsafe for any reason

Change the tire yourself if:

  • You’re in a safe location with adequate room to work away from traffic
  • You have all necessary tools and a properly inflated spare tire
  • Ground conditions are suitable for jacking
  • You’re confident in your ability to complete the task safely

There’s no shame in calling for help. Professional roadside assistance services have proper equipment and can often complete tire changes faster and more safely than DIY efforts in dangerous locations.

Changing a Flat Tire

Gather Tools and Equipment

Locate your spare tire, jack, and lug wrench before beginning. Most vehicles store these in the trunk, under cargo floors, underneath the vehicle, or mounted on the exterior (trucks and SUVs). Consult your owner’s manual if you can’t find these items.

Additional useful items include wheel chocks or large rocks to prevent rolling, flashlight for nighttime work, gloves to keep hands clean, reflective triangles or road flares to warn approaching traffic, and rain gear if weather is poor.

Set Up Warning Devices

If you have reflective triangles, road flares, or other warning devices, place them 200-300 feet behind your vehicle to alert approaching drivers. Position devices earlier on curves or hills where sight distances are limited. These warnings help prevent accidents from drivers who don’t see your stopped vehicle in time.

Secure the Vehicle

Place wheel chocks, large rocks, or blocks of wood behind the tires diagonal from the flat tire to prevent rolling. If the front right tire is flat, chock both rear tires. This extra safety measure protects you if the parking brake fails or the jack slips.

Double-check that the parking brake is engaged and transmission is in Park or first gear.

Loosen Lug Nuts

Before raising the vehicle, loosen the lug nuts on the flat tire while weight is still on the wheel. Attempting to loosen lug nuts after raising the vehicle causes the wheel to spin, making removal nearly impossible.

Using the lug wrench, turn each lug nut counterclockwise (lefty-loosey) about one half turn. You’re not removing them completely yet, just breaking them loose. You may need to stand on the wrench or use your body weight for leverage if lug nuts are very tight. Loosen all lug nuts before proceeding to jacking.

Position and Operate the Jack

Locate the proper jacking point on your vehicle’s frame or rocker panel near the flat tire. Consult your owner’s manual for exact locations—jacking at incorrect points can damage the vehicle or cause the jack to slip. Most vehicles have reinforced jacking points marked with notches or symbols.

Position the jack directly under the jacking point and begin raising it by turning the jack handle or pumping the lever, depending on jack type. Raise the jack until it just contacts the vehicle but isn’t lifting yet. Verify the jack is positioned correctly and sitting squarely on firm ground.

Continue raising the vehicle until the flat tire is 4-6 inches off the ground, providing clearance to remove the flat and install the spare which will be slightly more inflated.

Remove the Flat Tire

Finish unscrewing the lug nuts completely by hand and set them in a safe location where they won’t roll away. Grab the flat tire firmly with both hands and pull it straight toward you off the wheel studs. Tires are heavy—a typical passenger car tire with wheel weighs 30-50 pounds. Bend your knees and use leg muscles rather than back muscles to avoid injury.

Set the flat tire on the ground near the vehicle where it won’t roll into traffic. Some people slide it under the vehicle’s frame near the jack as a safety measure—if the jack fails, the vehicle drops onto the tire instead of the ground, preventing the vehicle from falling completely.

Install the Spare Tire

Lift the spare tire and align the holes with the wheel studs. The spare may be lighter than a full-size tire if it’s a temporary “donut” spare. Slide the spare onto the studs, ensuring it’s flush against the hub.

Thread the lug nuts onto the studs by hand, turning clockwise. Get all lug nuts started by hand before tightening any with the wrench to ensure the wheel is centered properly on the studs.

Lower Vehicle and Tighten Lug Nuts

Using the lug wrench, tighten the lug nuts in a star or crisscross pattern rather than going around in a circle. This ensures even pressure distribution and centers the wheel properly. Tighten until snug but don’t apply maximum force yet—you’ll do final tightening after lowering the vehicle.

Lower the jack gradually until the spare tire is supporting the vehicle’s weight but the jack is still slightly engaged. Now tighten the lug nuts as much as possible using the star pattern, applying your full body weight to the wrench if needed to achieve proper torque.

Remove the jack completely and lower the vehicle fully to the ground. Give each lug nut one final check to ensure all are tight.

Store Equipment

Place the flat tire, jack, and lug wrench back in their storage locations. Secure the flat tire so it won’t slide around while driving. Don’t leave any tools or equipment on the roadside.

Driving on a Spare Tire

Temporary Spare Limitations

Temporary or “donut” spare tires are smaller and narrower than regular tires, designed only for emergency use to reach a tire shop. These spares have strict limitations:

Speed limit: Maximum 50 mph regardless of posted limits
Distance limit: 50-70 miles maximum before replacement
Handling changes: Reduced traction and altered vehicle dynamics requiring extra caution

Observe these limits strictly—exceeding them risks spare tire failure and potential accidents. Drive directly to a tire shop for proper tire replacement.

Full-Size Spare Considerations

Some vehicles include full-size spare tires identical to the other four tires. These can be driven normally with no speed or distance restrictions. However, if the spare is older or has a different tread pattern than your other tires, have the flat tire repaired or replaced promptly and reinstall it rather than continuing to drive on the spare indefinitely.

Get Professional Service Promptly

Visit a tire shop as soon as possible after installing any spare tire. Professional technicians will:

  • Inspect the flat tire to determine if it’s repairable or needs replacement
  • Check the spare tire’s condition and inflation
  • Properly torque lug nuts to manufacturer specifications
  • Inspect the other three tires for damage from the same hazard that caused the flat
  • Check wheel alignment if tire failure was severe

Preventing Flat Tires

Regular tire maintenance prevents most flat tires and blowouts:

  • Check tire pressure monthly including the spare, maintaining manufacturer-recommended pressures
  • Inspect tires for cuts, bulges, embedded objects, and uneven wear every month
  • Rotate tires every 5,000-7,000 miles to promote even wear
  • Replace tires when tread depth reaches 4/32 inch rather than waiting for the legal minimum
  • Avoid potholes, debris, and road hazards when safely possible
  • Don’t overload your vehicle beyond its weight capacity
  • Replace tires over six years old regardless of remaining tread

Frequently Asked Questions

What should I do immediately if my tire blows out?

Grip the steering wheel firmly with both hands, steer straight, and avoid slamming on the brakes. Never brake hard during a blowout as this causes loss of control. Instead, ease off the accelerator and let the vehicle slow naturally. Once speed drops below 30 mph, apply gentle brakes. Turn on hazard lights and pull completely off the roadway to a safe, flat location. Stay calm throughout the event as panic reactions lead to overcorrection and crashes.

Can I drive on a flat tire to get to a repair shop?

Never drive on a completely flat tire. Driving on a flat destroys the tire beyond repair, damages the wheel rim requiring expensive replacement, and creates dangerous handling that can cause loss of control. If you get a flat, pull over immediately and either change to the spare tire or call for roadside assistance. The few minutes saved by driving on a flat tire aren’t worth the hundreds or thousands in additional damage.

How do I know if my spare tire is still good?

Check the spare tire’s inflation pressure monthly—most spare tires require 60 psi, higher than regular tires. Inspect the spare for cracks, weather checking, or damage. Check the tire’s age using the DOT code on the sidewall—the last four digits indicate week and year of manufacture (example: “3024” means 30th week of 2024). Replace spare tires over six years old even if they’ve never been used, as rubber degrades with age.

How fast can I drive on a spare tire?

Temporary “donut” spare tires have a maximum safe speed of 50 mph regardless of posted speed limits. Drive no more than 50-70 miles on a temporary spare before getting proper tire replacement. Full-size spare tires identical to your regular tires can be driven at normal speeds with no distance restrictions. Check your spare tire or owner’s manual for specific limitations.

Should I call for help or change the tire myself?

Call for roadside assistance if you’re on a narrow shoulder with high-speed traffic, the ground is too soft or sloped for safe jacking, weather conditions are dangerous, you lack proper tools or spare, or you feel unsafe for any reason. Change the tire yourself only if you’re in a safe location with adequate room, have all necessary equipment, and feel confident in your ability. Professional assistance is always safer than risking injury attempting DIY changes in dangerous locations.

What causes tire blowouts?

Tire blowouts result from underinflation causing excessive heat buildup and tire failure, overloading the vehicle beyond its weight capacity, driving over potholes or road debris that tears the tire, worn tires with insufficient tread depth, age-related deterioration of rubber in tires over six years old, and manufacturing defects in rare cases. Regular tire pressure checks, proper inflation, avoiding road hazards, and replacing worn or aged tires prevents most blowouts.

How much does it cost to fix a flat tire?

Simple puncture repairs cost $15-$30 at most tire shops if the damage is in the tread area and less than 1/4 inch in diameter. Sidewall damage, large punctures, or multiple punctures require full tire replacement costing $100-$300 per tire depending on size and quality. Many tire shops offer free flat repairs if you purchased tires from them. Road hazard warranties available at purchase typically cost $15-$25 per tire and cover replacement costs for punctures and damage.

For roadside assistance and tire service information, contact AAA (aaa.com), your insurance company’s roadside assistance program, or your vehicle manufacturer’s roadside service. For tire maintenance guidance, consult tire manufacturers like Michelin, Goodyear, or Bridgestone, and the Tire Industry Association (tireindustry.org).

Leave a Comment