CarViraAutomotive magazine

Home / Article

Liftgate Strut Replacement: How to Replace and Maintain Gas Struts on U.S. Vehicles

Learn how to identify weak liftgate struts, replace them safely, and maintain proper trunk operation on SUVs, sedans, and hatchbacks in the U.S. Liftgate struts, also called gas springs or lift…

Liftgate Strut Replacement

Learn how to identify weak liftgate struts, replace them safely, and maintain proper trunk operation on SUVs, sedans, and hatchbacks in the U.S.


Liftgate struts, also called gas springs or lift supports, make it easy to open and hold your trunk, hatch, or tailgate. When they lose pressure, the door may sag, close unexpectedly, or require excessive force to lift.

For U.S. drivers—especially owners of SUVs like the 2026 Mazda CX-5 or 2027 BMW X5—knowing how to replace worn struts is a simple, low-cost way to maintain safety and convenience.


Key Takeaways

  • Weak or leaking gas struts cause the liftgate to drop unexpectedly.
  • Replacement typically costs $40–$120 per pair in the U.S.
  • Always replace struts in pairs for balanced lifting force.
  • Simple DIY job requiring only basic hand tools.
  • Never remove both struts at once without supporting the liftgate.

How Liftgate Struts Work

Each gas strut uses compressed nitrogen gas and oil to provide lifting assistance and hold the hatch open. When the internal seal wears out or gas leaks, the pressure drops, making the liftgate heavy and unstable.

“Hydraulic lift supports are considered safety-critical components that should be replaced immediately if they fail to hold the door,” — National Highway Traffic Safety Administration (NHTSA), 2025.


Signs of Worn or Failing Struts

SymptomExplanation
Liftgate drops or won’t stay openLoss of gas pressure
Slow or jerky movementInternal seal damage
Hissing sound during operationGas leakage
Visible oil residueSeal or shaft failure
Heavy liftgate effortLow pressure or uneven pair strength

From what I’ve seen, cold temperatures in northern states accelerate gas pressure loss, making winter failures common.


Tools and Materials Needed

  • New OEM or aftermarket struts
  • Flathead screwdriver or small pry tool
  • Support rod or assistant to hold the liftgate
  • Safety gloves and goggles

OEM struts can be ordered from Toyota.com or Ford.com to ensure proper fit and safety compliance.


Step-by-Step: How to Replace Liftgate Struts

Step 1: Support the Liftgate

Use a broomstick, prop rod, or ask a helper to hold the liftgate open. Never remove both struts at once.

Step 2: Locate the Mounting Clips

Each strut connects to a ball stud at both ends. Identify the retaining clips near the joints.

Step 3: Release the Clips

Insert a flathead screwdriver under the clip and gently lift it without removing it completely. This releases tension on the ball joint.

Step 4: Remove the Old Strut

Pull the strut off the mounting ball. Repeat for the other end.

Step 5: Install the New Strut

Push the new strut onto the mounting studs until it clicks into place. Ensure the thicker end (gas cylinder) faces upward.

Step 6: Test the Operation

Carefully lift and lower the hatch to check smooth motion and proper holding force.


Safety Tips

  • Replace both struts at the same time for balanced operation.
  • Avoid pressing or puncturing the gas cylinder—it’s under pressure.
  • Always wear eye protection during removal.
  • Do not use pliers or force to twist the shaft; it can damage seals.

“Even partially weak lift supports can pose injury risks during cargo loading,” — AAA Vehicle Safety Bulletin, 2024.


Average Replacement Costs in the U.S.

Vehicle TypeParts Cost (Pair)Labor (if professional)Total Average
Compact Cars$40–$60$50–$75$90–$120
SUVs / Crossovers$50–$80$75–$120$125–$200
Luxury Models$80–$120$100–$150$180–$270
Power Liftgate Systems$120–$250$150–$250$300–$500

From my experience, many SUV owners replace the struts themselves in less than 20 minutes using only a screwdriver.


Preventing Future Failures

Maintenance StepBenefit
Clean shafts regularlyPrevents corrosion and seal damage
Avoid slamming liftgateExtends internal gas seal life
Keep seals lubricatedReduces friction during movement
Store vehicle indoorsLimits exposure to cold and moisture

In regions with harsh winters, mild silicone spray helps protect the piston shafts from rust and pitting.


Advanced Systems: Power and Electronic Liftgates

Newer vehicles like the Tesla Model Y Long Range or luxury SUVs in SUVs Under $100,000 often use electronic or powered liftgates. These systems integrate electric motors and sensors, so replacement requires recalibration by a certified technician.


Common Mistakes to Avoid

  • Replacing only one strut—leads to uneven load and premature failure.
  • Using cheap, unpressurized aftermarket parts.
  • Installing struts upside down (gas end must face up).
  • Ignoring minor leaks that worsen over time.
  • Attempting to recharge gas struts—unsafe and ineffective.

FAQs

Why does my liftgate close too quickly?

The gas pressure in one or both struts has decreased, requiring replacement.

Can I lubricate my liftgate struts?

No. The shaft must stay clean and dry; lubricants attract dirt and damage seals.

Should I replace both struts at once?

Yes. Unequal force between sides causes twisting and hinge wear.

Do power liftgates use gas struts?

Yes, most have hydraulic or gas-assisted struts combined with electric motors.

Are struts covered under warranty?

Usually not, unless failure occurs within the basic or bumper-to-bumper coverage period.

Can extreme cold affect performance?

Yes. Low temperatures reduce internal pressure, temporarily weakening support.

Is it safe to drive with weak liftgate struts?

Yes, but unsafe for loading or unloading—replace them promptly.


Conclusion

Weak or leaking liftgate struts are more than an inconvenience—they’re a safety hazard. Replacing them is a simple DIY task that restores function, prevents injury, and extends your vehicle’s usability.

I recommend inspecting your lift supports twice a year, especially before winter. For long-lasting performance, choose OEM-quality pressurized struts and replace both sides simultaneously.

For more DIY maintenance guides, explore Best Small SUVs and Best Family Pickup Trucks for vehicles offering reliable liftgate designs and easy maintenance access.

Leave a Comment